Here is my hard drive bay assembly. It consists of a totally inclosed unit. At its heart will sit two 150 gig 10,000 rpm VelociRators configured in raid 0.
These hard drives generate life shortening heat, so IM trying to cool them heavily on air. Massive 114L x 74W x 24H mm all copper heat sinks sit on
each drive. These sinks were designed for CPUs, but in my theory should cool these drives also. They will be assisted by 74mm tip magetic driving fans.
The fans are mounted on Lexan and the Lexan is butted up against the sinks. This drives the air through the sink fins and only the sink fins. After exiting
the fins, the air is directed under the drives via a curved peice of polycarbonate cooling the bottom of the drives also before exiting the rear of the case.
These fans are very powerful for their size and fairly loud at full RPM so they will be hooked up to the fan controller. Each drive will also have its own temp
gauge sitting on it to monitor the heat. This hard drive bay will be the jewel that sits at the bottom of the case. I sure do hope it works well. It took me
a long time to build it.
- 90.JPG (55.02 KB) Viewed 2795 times